Solar garden light in the production process, all from the Ming tube, powder, or CPT tubes, its production process is basically the same, they are subject through the glass tube forming, sealing electrode, bombardment to the gas, inert gas filling, sealing and other process exhaust Kong Lao Lian .
Glass tube forming - that is, production staff along the contours of images or text through the special flame will burn straight glass tube, baking, bent pattern or text of the process, high or low levels of production staff present their naked eye see out of the low level of The staff made of rugged corner lamp easy to occur, too thick or too thin, medial fold, not a plane, etc. skew.
Seal-forming electrode - soon after the fire of the lamp electrodes and exhaust vent connected to the process, interface not too thin or too thick, the interface Department is required to completely melt, otherwise easy to slow leak occurs.
Bombardment degassing - the key to make solar garden lights. Bombarded by high-voltage electrodes, the heating lamp burning pipette electrode invisible water vapor, dust, oil and other substances, ranked out of these harmful substances will be pumped into a vacuum glass tube process. Bombardment to the gas temperature reaches less than the above-mentioned hazardous substances In addition to not thorough enough, a direct impact on the quality of the lamp. Bombardment to the gas temperature is too high will cause excessive oxidation of electrodes to the surface oxide layer, causing the lamp quality. Bombardment degassing of the glass tube filled completely into the appropriate inert gas, through sophisticated production process to complete the led light.
[Edit this paragraph] solar garden light Situation and Development of
At present, the solar garden lights on the market was mixed, there business license contracts were awarded to the unit only 30% of the market, these units alone design, manufacture, installation capacity, good reputation, product quality and clearance, post-maintenance in place, is the user's preferred unit of .
The second category, there is no other units affiliated business license, such "unit" is not strong professionalism, product quality no guarantee, post-maintenance not in place.
The third category, shell companies, without any documents, credibility and ability to hit a shot-for-one, the product quality and post-maintenance whatsoever.
solar garden light is a professional industry stronger, formal unit of product quality, long life. It could be the second and third categories disrupt the solar garden light's market, giving users easy to feel bad Led Flashlight. In fact, the life of solar garden light is longer than the fluorescent lights, and for your interest, please select a license and the ability, credibility of the unit.
Almost all the solar garden light manufacturing enterprises before an ordinary glass tube, common electrode, with the increase in demand for products, high-lead glass, ceramic ring electrode, three base toner tubes, solar garden light rainbow gradient direction of being more and more widely in people's lives to make people's lives more exciting and beautiful.
Glass tube forming - that is, production staff along the contours of images or text through the special flame will burn straight glass tube, baking, bent pattern or text of the process, high or low levels of production staff present their naked eye see out of the low level of The staff made of rugged corner lamp easy to occur, too thick or too thin, medial fold, not a plane, etc. skew.
Seal-forming electrode - soon after the fire of the lamp electrodes and exhaust vent connected to the process, interface not too thin or too thick, the interface Department is required to completely melt, otherwise easy to slow leak occurs.
Bombardment degassing - the key to make solar garden lights. Bombarded by high-voltage electrodes, the heating lamp burning pipette electrode invisible water vapor, dust, oil and other substances, ranked out of these harmful substances will be pumped into a vacuum glass tube process. Bombardment to the gas temperature reaches less than the above-mentioned hazardous substances In addition to not thorough enough, a direct impact on the quality of the lamp. Bombardment to the gas temperature is too high will cause excessive oxidation of electrodes to the surface oxide layer, causing the lamp quality. Bombardment degassing of the glass tube filled completely into the appropriate inert gas, through sophisticated production process to complete the led light.
[Edit this paragraph] solar garden light Situation and Development of
At present, the solar garden lights on the market was mixed, there business license contracts were awarded to the unit only 30% of the market, these units alone design, manufacture, installation capacity, good reputation, product quality and clearance, post-maintenance in place, is the user's preferred unit of .
The second category, there is no other units affiliated business license, such "unit" is not strong professionalism, product quality no guarantee, post-maintenance not in place.
The third category, shell companies, without any documents, credibility and ability to hit a shot-for-one, the product quality and post-maintenance whatsoever.
solar garden light is a professional industry stronger, formal unit of product quality, long life. It could be the second and third categories disrupt the solar garden light's market, giving users easy to feel bad Led Flashlight. In fact, the life of solar garden light is longer than the fluorescent lights, and for your interest, please select a license and the ability, credibility of the unit.
Almost all the solar garden light manufacturing enterprises before an ordinary glass tube, common electrode, with the increase in demand for products, high-lead glass, ceramic ring electrode, three base toner tubes, solar garden light rainbow gradient direction of being more and more widely in people's lives to make people's lives more exciting and beautiful.
niuhaibiao
on Jan 28, 2010
When the lamp began to light the need for a high voltage, normal light, when not only allows the current, when the voltage across the lamp below the supply voltage. This high-voltage, they jump by our usual talking bubble (starter) to provide. Power is switched on, due to the neon bulb starter within two pieces of metal is not connected to the power breakdown neon electrical conductivity, when we see that neon light bulb, neon when the heat conductive, causing neon bulb inside the pairs of metal sheets (that is, we see curved Flanagan), after heat bending down, and connected to two electrodes, when a larger current through the ballast. Start solar garden light to achieve high-voltage requirements. Later, due to pairs of metal sheets after the neon bulb connected to the neon light is no longer conductive, the temperature fell rapidly, double metal restitution, quickly cut off the supply, the current from the higher value ballast suddenly becomes O, produced very high self-induction electromotive force, the self-inductance voltage is enough to puncture the mercury vapor lamp, mercury vapor to produce ultraviolet light and ionizing conductive excitation light-emitting phosphors, solar garden light tubes conductive, the voltage drop at both ends of solar garden light tubes (100V them about), This voltage can no longer make neon bulb conductivity (the breakdown voltage of neon bulb for 150V or so) while the light-emitting, double-metal sheets are no longer connected, and this time, the solar garden light can be continuous.
solar garden light: inside lamp load some special gas, but also in the tube coated with phosphor on the wall, after the power light due to electrical discharges. solar garden light: it does not contain infrared, so it's just a very moderate, and not to hurt the eyes; because they do not contain hot, using up more energy-saving; it will send many beautiful colored light. This is from the phosphor inside the nature of chemicals contained in set, for example coated with tungsten acid, magnesium, hair blue and white shade, coated with boric acid cadmium hair pink shade.
solar lamp with both ends of the filament, tube wall coated with a thin uniform layer of phosphor, tube has been pumped into the vacuum of 10-3-10-4 mm Hg after charging into a small amount of inert gas, but also small amount of liquid injected mercury. Ballast is an iron-core inductor coil, the nature of the inductor coil when the current changes, caused by magnetic flux in the coil will change, resulting in induction electromotive force, its direction and current in the opposite direction, thereby hampering the current changes.
Starter switch in the circuit play a role, which consists of a neon discharge tube made in parallel with a capacitor, capacitance of the role is to eliminate the power of electromagnetic interference with the formation of oscillation circuit ballast to increase the start pulse voltage amplitude. Discharge electrode pairs in a metal composition, the use of neon bulb discharge heating, so that pairs of metal sheets in the opening and closing when the current is caused by mutations in ballast inductor and generate high-voltage pulse added to the tube ends.
When the lamp access to the circuit after the starter began to glow discharge between two electrodes, so that pairs of thermal expansion of metal pole with static touch contact, so power supply, ballast, and starter filament form a closed loop, the current so that the filament preheating, when the heating time of 1-3 seconds after the starter between the two electrodes out of the glow discharge, followed bimetal cool touch very disconnected with the static, when the two electrodes disconnected moments , the circuit in the current suddenly disappeared, so ballast to generate a high-voltage pulse, which overlapped with the power supply, added to the tube at both ends, so that the inert gas ionization inside the tube caused by arc discharge, in the normal light-emitting process, ballast self-inductance device also plays a role of a stable current in the circuit.
Now more and more electronic solar garden light ballasts. Electronic Ballast come out in the early eighties by the Dutch Philips company first developed. Because of its traditional inductive ballast compared, particularly in the electrical properties of the more unique. Is actually a high-frequency resonant inverter, its small size, led light weight, low energy consumption, low voltage start-up and able to work, no flash and noise. However, the circuit's operating frequency of up to 20 ~ 30kHz, so there are more serious interference with radio frequency interference and electromagnetic radiation, affecting the normal operation of other electronic devices, but also easy to power pollution, harm to the human body. After actual use, its life (and the impact of lamp life), not as good as inductive converter.
With the development of the times, solar garden lights are gradually being principles similar but smaller more efficient energy-saving lamps (three-color solar garden lights) to replace.
solar garden light: inside lamp load some special gas, but also in the tube coated with phosphor on the wall, after the power light due to electrical discharges. solar garden light: it does not contain infrared, so it's just a very moderate, and not to hurt the eyes; because they do not contain hot, using up more energy-saving; it will send many beautiful colored light. This is from the phosphor inside the nature of chemicals contained in set, for example coated with tungsten acid, magnesium, hair blue and white shade, coated with boric acid cadmium hair pink shade.
solar lamp with both ends of the filament, tube wall coated with a thin uniform layer of phosphor, tube has been pumped into the vacuum of 10-3-10-4 mm Hg after charging into a small amount of inert gas, but also small amount of liquid injected mercury. Ballast is an iron-core inductor coil, the nature of the inductor coil when the current changes, caused by magnetic flux in the coil will change, resulting in induction electromotive force, its direction and current in the opposite direction, thereby hampering the current changes.
Starter switch in the circuit play a role, which consists of a neon discharge tube made in parallel with a capacitor, capacitance of the role is to eliminate the power of electromagnetic interference with the formation of oscillation circuit ballast to increase the start pulse voltage amplitude. Discharge electrode pairs in a metal composition, the use of neon bulb discharge heating, so that pairs of metal sheets in the opening and closing when the current is caused by mutations in ballast inductor and generate high-voltage pulse added to the tube ends.
When the lamp access to the circuit after the starter began to glow discharge between two electrodes, so that pairs of thermal expansion of metal pole with static touch contact, so power supply, ballast, and starter filament form a closed loop, the current so that the filament preheating, when the heating time of 1-3 seconds after the starter between the two electrodes out of the glow discharge, followed bimetal cool touch very disconnected with the static, when the two electrodes disconnected moments , the circuit in the current suddenly disappeared, so ballast to generate a high-voltage pulse, which overlapped with the power supply, added to the tube at both ends, so that the inert gas ionization inside the tube caused by arc discharge, in the normal light-emitting process, ballast self-inductance device also plays a role of a stable current in the circuit.
Now more and more electronic solar garden light ballasts. Electronic Ballast come out in the early eighties by the Dutch Philips company first developed. Because of its traditional inductive ballast compared, particularly in the electrical properties of the more unique. Is actually a high-frequency resonant inverter, its small size, led light weight, low energy consumption, low voltage start-up and able to work, no flash and noise. However, the circuit's operating frequency of up to 20 ~ 30kHz, so there are more serious interference with radio frequency interference and electromagnetic radiation, affecting the normal operation of other electronic devices, but also easy to power pollution, harm to the human body. After actual use, its life (and the impact of lamp life), not as good as inductive converter.
With the development of the times, solar garden lights are gradually being principles similar but smaller more efficient energy-saving lamps (three-color solar garden lights) to replace.
niuhaibiao
on Jan 28, 2010
Partners with Poetryexpress
